CP Light
The CP Light offers a lightweight alternative,
but with all the benefits of a fire test and high quality construction.
The CP Light is available in both a paint quality finish or with a veneer to suit individual requirements. Finished in an attractive veneer, the CP Light is an ideal choice for internal doors and would enhance any home or office environment.
Construction specification
Stiles
Sapele, 20 mm wide x 37 mm thick (640kg/m3)
Rails
Sapele, 20 mm wide x 37 mm thick (640kg/m3)
Core
Outer: Albisia Falcata vertical lamels, 12.5 mm thick x 44 mm wide (200~300 kg/m3); inner: Albisia Falcata horizontal lamels, 12.5 mm thick x 44 mm wide (200~300 kg/m3)
Facings
MDF, chipboard, plywood, laminates or plastics
Face adhesives
Duplit 1P (D4 spec)
Lippings
8 mm hardwood
(550 kg/m3 min. density)
Lipping adhesive
Polyurethane
Leaf sizes
Configuration
(LSASD) dimensions = 2135 x 1051 mm ~ 2427 x 915 mm; (DASD & ULSASD) dimensions = 2135 x 1026 mm ~ 2377 x 915 mm. Overpanels of the same construction as the door panels may only be used with this doorset design if separated by a transom (max. heights = single leaf doorsets - 2000 mm, and double leaf doorsets - 1500 mm). Unequal leaf double doorsets are covered by this assessment with no restriction on the smaller leaf dimension, providing both leaf dimension remain within the permitted size limits..
Glazing
Max. glazed area = 0.72 m2
per leaf (assessed systems
see CHILT/RF02103)
Frame specification
Minimum section
Min. section = 70 x 32 mm
Material
Softwood or hardwood
Density
510 kg/m3 min.
Intumescent materials
Headjams & transomed overpanels. 15 x 4 mm fitted centrally in the leaf or frame reveal (increased to 20 x 4 mm if over 2135 x 915 mm). Name approved intumescent systems (leafs/glazing) are available with fitting instructions on request
Supporting technical data
Test reports: RF02103 & A02220